Vibrating Rod Level Switch for Bulk Solids

Name: Vibrating Rod Level Switch for Bulk Solids
Brand: WELK Level

Vibrating rod point level switch for granular and coarse bulk solids in silos and hoppers.

MediaGranular solids

DutyHigh / low alarm

InstallTop / side

OutputRelay / transistor

Request quote Attach files

Why choose· 01

Built for your duty.

Solid-specific detection

Vibrating rod technology is used for granules and coarse solids where liquid switches are unsuitable.

Low maintenance

Smooth probe designs help reduce jamming and buildup compared with some mechanical methods.

Flexible alarm points

Top or side mounting can be selected for full, empty or demand level detection.

Engineer-checked selection

WELK checks medium, alarm height, mounting orientation, connection, output logic, power, contact rating and material requirement so the quoted configuration matches the application.

Application-matched configuration

Selection notes focus on real tank conditions, measuring range, process connection, output signal and installation limits.

Product details· 02

How it is selected & specified.

Vibrating rod switches detect the presence of bulk solids by monitoring the vibration change when material covers the probe.

Bulk density, particle size, buildup, mounting angle and vessel vibration should be checked before model selection.

Vibrating Rod Level Switch for Bulk Solids is presented as a configurable WELK product family. Final model limits, wetted materials, process connection, certificate and output signal are confirmed from the selected datasheet before quotation.

Point level switch selection starts from medium behavior, alarm point, mounting direction, density or dielectric, buildup risk, process connection, power and contact logic.

Specifications· 03

Vibrating Rod Level Switch for Bulk Solids specification range.

Parameter	Value
Measuring principle	Vibrating rod / vibronic point detection
Media	Granular and coarse bulk solids
Mounting	Side or top mount by alarm point
Output	Relay or transistor by electronics
Selection note	Bulk density and buildup risk determine probe choice
RFQ data	Material name, bulk density, particle size, temperature, mounting point and output
Ingress protection	IP67
Material options	Aluminum alloy
Power supply	DC 24V / AC 220V
Range / measuring length	270~6000mm

Applications· 04

Where this product works.

Powder silosGrain binsPlastic pelletsCement hoppersHigh level alarmLow level alarmPump protectionOverflow prevention

Application

Silo & Powder Level

Powder silos and bulk solids

Wetted materials & output options.

316LStainless SteelProcess connectionMounting bracketWetted materialExplosion-proof option

Send medium, range, tank geometry, process connection and output signal for model review.

Packaging & shipping· 05b

Export packing as standard.

Packed for export with protected sensor head, probe/antenna/chamber support where needed, model label, wiring note and requested inspection or calibration documents.

Packaging and documents →

Spec siblings· 05c

Spec siblings & common vibrating rod level switch for bulk solids specs.

Measuring principle Media Mounting Output Selection note RFQ data

FAQ· 06

Vibrating Rod Level Switch for Bulk Solids questions.

How do I choose the switching point for Vibrating Rod Level Switch for Bulk Solids?

Start from medium, alarm height, mounting orientation, connection, output logic, power, contact rating and material requirement. WELK then confirms the exact model, material and output before quotation.

What is the difference between Vibrating Rod Level Switch for Bulk Solids and continuous transmitter?

Vibrating Rod Level Switch for Bulk Solids is selected for its specific duty and limitations. WELK compares it with continuous transmitter, radar, ultrasonic when the process data suggests another technology may be safer.

Can Vibrating Rod Level Switch for Bulk Solids be customized?

Yes. Range, process connection, wetted material, output signal, cable length, display, switch points, documents and OEM label can be reviewed by product family.

What are the common limits of Vibrating Rod Level Switch for Bulk Solids?

Sticky buildup, coating, turbulence, low density solids, non-conductive liquids or tank-wall material can make one switch principle unsuitable.

Are the listed specifications final for every project?

No. Published values are typical selection ranges. WELK confirms final limits, material, output, certificate and documents from the actual process data before quotation.

Need vibrating rod level switch for bulk solids? Send the conditions.

Attach tank drawings, old instrument photos or datasheets if available.