PTFE / lined parts
PTFE is used as a selection profile for WELK level instrument projects. Send medium, range and installation details so engineering can confirm compatibility before quotation.
Non-contact 80 GHz FMCW radar level meter for tanks, silos and difficult process conditions up to 70 m.
High-frequency radar level meter for tall silos, dusty bulk solids and sloped material surfaces.
Self-cleaning air-purge radar configuration for dusty silos and buildup-prone powder applications.
High-frequency radar level meter configured for cement silos, fly ash storage and heavy-dust bulk solids.
Non-contact radar level meter selected for acid, alkali, solvent and chemical tanks with corrosion-resistant wetted/exposed parts.
Radar level transmitter configuration for hazardous-area storage tanks and process vessels.
Radar level meter configuration for hot process vessels, thermal tanks and high-temperature vapor spaces.
Probe-guided radar transmitter for narrow vessels, foam, turbulence and interface measurement review.
Flexible cable-probe guided wave radar for tall tanks, bypass-free vessels and selected bulk solids applications.
Rigid rod-probe guided wave radar for short-to-medium tanks, stable liquid surfaces and bypass chambers.
Coaxial guided wave radar configuration for low-dielectric liquids, bypass chambers and compact process vessels.
Integrated and split ultrasonic level meters for tanks, sumps and wastewater level control.
Loop-powered ultrasonic transmitter for 4-20 mA/HART tank level measurement up to 12 m class.
Ultrasonic level instrument for channels, weirs and flumes with level-to-flow conversion.
Ultrasonic level meter with corrosion-resistant sensor face for acid, alkali and chemical storage duties.
Separated sensor and wall-mounted display/controller for tanks, pits and hard-to-access mounting points.
Short-range ultrasonic sensor for small tanks where the maximum level is close to the sensor face.
Hazardous-area ultrasonic level meter for compatible chemical tanks and non-contact alarm duties.
Hydrostatic level transmitter with corrosion-resistant body, cable and diaphragm options for chemical liquids.
Flush diaphragm pressure-level transmitter for viscous, slurry or buildup-prone liquid tanks.
Differential pressure level transmitter configuration for closed tanks, pressurized vessels and density-compensated liquid level duties.
Tri-clamp or hygienic flush diaphragm transmitter for food, beverage, pharmaceutical and clean-process tank level measurement.
Magnetic level gauge for local indication on pressure vessels up to 16 MPa and 350 C.
Bypass chamber magnetic level gauge for side-side or side-bottom vessel connections.
Top-entry magnetic level gauge for tanks without side nozzles or with top-mounted instrument access.
Magnetic level gauge with PTFE, PP, PVC or lined wetted parts for corrosive liquid tanks.
High-resolution continuous liquid level transmitter for magnetic gauge chambers or direct float-probe installation.
High-accuracy magnetostrictive level gauge for clean liquid storage tanks, fuel tanks and chemical tanks.
Dual-float magnetostrictive transmitter for total level and liquid-liquid interface measurement review.
Packaged magnetic gauge solution with local indication, alarm switches and 4-20 mA transmission.
Engineered magnetic level gauge for pressure vessels, separators and demanding process conditions.
Magnetic level gauge with steam jacket or heat tracing for viscous liquids and temperature-maintained tanks.
Vibrating fork point level switch for liquid overfill, dry-run protection and process interlock duty.
Capacitance point level switch for liquids, slurries, foam, interfaces and selected bulk solids.
RF admittance point level switch for sticky liquids, powders, slurries and buildup-prone applications.
Electrode level switch for conductive liquids in tanks, sumps and pump-control applications.
Mini tuning fork level switch for small tanks, pipes and compact liquid detection points.
Hazardous-area tuning fork level switch for liquid overfill, dry-run and safety interlock duties.
OEM/ODM level instrument package covering range, connection, output, label and documentation requirements.
Share medium and process conditions for compatibility review.
Uploaded reference files are included with the inquiry. For larger CAD packages, reply to the confirmation email or send them here:
Our team typically replies within 24 hours.
